All Weather Tuft®

What is All Weather Tuft®?
All Weather Tuft® is an additional, rotproof surface cover, for new and already existing riding grounds. All Weather Tuft® is being generated out of a new mat, consisting of polyamide and polyester fiber, which is being blended into the final product. The product then has to be added onto consisting sandy soil, creating a stable and low-maintenance riding ground surface. All Weather Tuft® consists of fine shreds (approximately two times four centimeters) and is environmentally friendly. 

How to apply All Weather Tuft®?
All Weather Tuft® has to be added as a top layer onto a sandy subsurface, with at least 15 to 20 centimeters of sand in height. First, level off the riding ground, then add All Weather Tuft® and distribute it evenly. Afterwards, if desired, solidify it with a rotary harrow.
In Germany and Luxemburg, All Weather Tuft® is often being added onto gravel soil without an additional layer of sand. In this case, we advise adding a thicker layer of All Weather Tuft® (approximately 15 to 20 centimeters). 

How is All Weather Tuft® being delivered? 
All Weather Tuft® is being delivered in bales of 450 to 500 kilograms, with two bales on one pallet. 

Amounts required:

20 x 40 riding ground:

In case of a solid ground 16 to 20 bales (1 per 40 to 50 m²)

In case of a soft ground 24 to 30 bales (1 per 30 to 40 m²)

In case of a rocky surface without sand: 32 bales (1 per 25 m²)

20 x 60 riding ground:

In case of a solid ground 24 to 30 bales (1 per 40 to 50 m²)

In case of a soft ground 30 bales(1 per 30 to 40 m²)

In case of a rocky surface without sand 48 bales (1 per 25 m²)


E-mail us for made-to-order consultation.

All Weather Tuft® and Hippotex® are being delivered with the ENVIRONMENT certificate, for inter-European use. 

 

Copyright © 2016 All Weather Tuft. All rights reserved. Webdesign by Internetbureau Antum Full service internetbureau Antum